RFL & mesh foot beds
Sat 26 Mar, 2016 1:57 pm
I know I have mentioned these a few times but today I remembered to take pictures
These are very simple but very very effective when the ground is frozen and colder than freezing
I used the relectix as I had a scrap but breathable building foil paper does the same job
Layer of fibreglass mesh; then the RFL then 2 more layers of FG mesh and sew together
There are very few makers of cold weather boots that have anywhere near enough insulation under the feet and this is a very cost effective upgrade
These are very simple but very very effective when the ground is frozen and colder than freezing
I used the relectix as I had a scrap but breathable building foil paper does the same job
Layer of fibreglass mesh; then the RFL then 2 more layers of FG mesh and sew together
There are very few makers of cold weather boots that have anywhere near enough insulation under the feet and this is a very cost effective upgrade
- Attachments
-
- DSCN0743.JPG (126.64 KiB) Viewed 3851 times
-
- DSCN0744.JPG (131.9 KiB) Viewed 3851 times
-
- DSCN0745.JPG (126.92 KiB) Viewed 3851 times
-
- DSCN0746.JPG (134.2 KiB) Viewed 3851 times
-
- DSCN0747.JPG (130.95 KiB) Viewed 3851 times
-
- DSCN0748.JPG (128.38 KiB) Viewed 3851 times
© Bushwalk Australia and contributors 2007-2013.