Wood stoves - simple fix to stop smoking

Hi ya
Does your wood stove smoke really badly when you put the billy on it? If so read on....
Ive been playing around with a bunch of the folding wood stoves. As some would know ive tried many of the folding ones - and given most of them away for free, the expensive titaNium versionstoo, as i was never really happy with them compared to my cheapo diy gassifier designs made from fruit and tomato tins.
I’d kept a few cheap steel folding ones i got from china that look like copies of the official titanium ones from usa and during this time of being cooped up at home ive been, well, playing and testing..
One of my key gripes of the folding stoves is that when burning eucalyptus twigs while thry burn ok, they tend to smoke really bad as soon as you put on a billy, unlike when burning twigs from north americsn timber. Really really smoke when you out a billy on them. . I usually use my own diy gassifier design from fruit tomato tins with a pot stand and it burns clean and boils far better..
Well, over last day ive finally solved my smoke issue. Doh! Use a pot stand over the folding wood stove to lift the billy/pot up above the stove with a gap to allow the flames to do a good secondary burn of the wood gases. Like the penny wood stove you need some height. (look it up). If you provide an inch and half gap from billy to top of wood stove all the smoke goes and its a clean burn. You do need a high tin foil windscreen for this. Kinda obvious in hindsight, though. I use a one to two inch mesh pot stand on my gaasifiers for this reason also. These folding stoves are designed to not use a pot stand but most need one for euca twigs..
Does your wood stove smoke really badly when you put the billy on it? If so read on....
Ive been playing around with a bunch of the folding wood stoves. As some would know ive tried many of the folding ones - and given most of them away for free, the expensive titaNium versionstoo, as i was never really happy with them compared to my cheapo diy gassifier designs made from fruit and tomato tins.
I’d kept a few cheap steel folding ones i got from china that look like copies of the official titanium ones from usa and during this time of being cooped up at home ive been, well, playing and testing..
One of my key gripes of the folding stoves is that when burning eucalyptus twigs while thry burn ok, they tend to smoke really bad as soon as you put on a billy, unlike when burning twigs from north americsn timber. Really really smoke when you out a billy on them. . I usually use my own diy gassifier design from fruit tomato tins with a pot stand and it burns clean and boils far better..
Well, over last day ive finally solved my smoke issue. Doh! Use a pot stand over the folding wood stove to lift the billy/pot up above the stove with a gap to allow the flames to do a good secondary burn of the wood gases. Like the penny wood stove you need some height. (look it up). If you provide an inch and half gap from billy to top of wood stove all the smoke goes and its a clean burn. You do need a high tin foil windscreen for this. Kinda obvious in hindsight, though. I use a one to two inch mesh pot stand on my gaasifiers for this reason also. These folding stoves are designed to not use a pot stand but most need one for euca twigs..