[SA ADL Post Aus] 2-person net tent (Bear Paw WD)
Posted: Wed 27 Jan, 2016 4:41 pmNet 2 from Bear Paw WD as per link below.
http://www.bearpawwd.com/net_tents/walled_net_tent.php
Suitable for pitching under a tarp -- nice option for hammockers who don't want to buy a tent and just use their tarp when they "go to ground".
I bought this several years ago, but I have sadly never even pitched it as I bought a Tarptent soon after and couldn't be bothered with tarps anymore!
It has the 8" bathtub extensions, which make a for total of 10"/30cm of bathtub protection as shown in photo. The rest of the tent is noseeum netting. There is a single zipper on one side. There are four peg hoops (one on each corner at ground level), plus a Lineloc on the top of each 'peak' and at each corner at the top of the bathtub section.
I don't recall whether I got it made in 30D or 70D silnylon, but I think it might be the 70D based on the weight. Could be wrong on that though.
Size of floor base is 210 cm x 130 cm. The height of the ridgeline is 100cm. Weight is 540g including stuff sack, as shown in photo.
Sorry no photos of it pitched as I would have to measure out and cut guylines etc.
Comes with a net stuff sack and some red guyline cord.
$100 posted anywhere in Australia. $80 pickup from Gawler, SA (can probably arrange Adelaide city pick up if required).
Laid out as flat as I can with Thermarest Regular for sizing.
Oops the measuring tape didn't really show up. Its 30cm from peg loop to top of bathtub section.
http://www.bearpawwd.com/net_tents/walled_net_tent.php
Suitable for pitching under a tarp -- nice option for hammockers who don't want to buy a tent and just use their tarp when they "go to ground".
I bought this several years ago, but I have sadly never even pitched it as I bought a Tarptent soon after and couldn't be bothered with tarps anymore!
It has the 8" bathtub extensions, which make a for total of 10"/30cm of bathtub protection as shown in photo. The rest of the tent is noseeum netting. There is a single zipper on one side. There are four peg hoops (one on each corner at ground level), plus a Lineloc on the top of each 'peak' and at each corner at the top of the bathtub section.
I don't recall whether I got it made in 30D or 70D silnylon, but I think it might be the 70D based on the weight. Could be wrong on that though.
Size of floor base is 210 cm x 130 cm. The height of the ridgeline is 100cm. Weight is 540g including stuff sack, as shown in photo.
Sorry no photos of it pitched as I would have to measure out and cut guylines etc.
Comes with a net stuff sack and some red guyline cord.
$100 posted anywhere in Australia. $80 pickup from Gawler, SA (can probably arrange Adelaide city pick up if required).
Laid out as flat as I can with Thermarest Regular for sizing.
Oops the measuring tape didn't really show up. Its 30cm from peg loop to top of bathtub section.