UL Silnylon Bivy

Discussion about making bushwalking-related equipment.

UL Silnylon Bivy

Postby DanShell » Sun 24 Aug, 2014 7:42 pm

For my third sewing project I made myself a silnylon Bivy.

Im not 100% why other than I thought it would be a nice project to keep extending my sewing knowledge or ability and who knows I may even use it one day ;)

Actually at 149 grams I will do away with the emergency blanket in my first aid kit and keep this instead. (thanks to the bush walk.com member for the suggestion).

Im not certain of the nylon ratings but the base uses a waterproof silnylon approx 1.3oz which is quite thin but I drenched a towel and knelt on it on the bathroom floor using the silnylon as a barrier and no moisture came through so Im confident it will do the job for what ill ever use it for.
The top is made from a water resistant breathable nylon and I used quite a bit of mesh over my head. The whole thing is zipped right around the top and a third down both sides, so access is easy. Although zipping it up once in it isn't as easy as Id like but it is a bivy, so its quite a confined space.

I think if I was to use it as a part of a sleeping system on a hike it would be under my tarptent or under a tarp of some sort and Id most likely still use some sort of ground cover. I will probably give this one to my son or wife to use and make another one that is slightly longer and larger as I feel a little cramped in it. I made it to suit my mat so it definitely keeps me on the mat but in hindsight I could have made it larger. I might sew some more tabs into it so I can tie it up in the tent and keep it off me a little, that may help with the cramped feeling.

As usual, sorry about the poor quality phone pic.
Attachments
bivy1.jpg
bivy1.jpg (55.14 KiB) Viewed 10334 times
User avatar
DanShell
Athrotaxis selaginoides
Athrotaxis selaginoides
 
Posts: 1200
Joined: Mon 18 Mar, 2013 11:23 am
Location: Central
Region: Tasmania
Gender: Male

Re: UL Silnylon Bivy

Postby perfectlydark » Sun 24 Aug, 2014 7:44 pm

That looks good! Do you have any suspension in it to.keep it off your face?
perfectlydark
Phyllocladus aspleniifolius
Phyllocladus aspleniifolius
 
Posts: 921
Joined: Tue 04 Jun, 2013 6:13 pm
Region: New South Wales
Gender: Male

Re: UL Silnylon Bivy

Postby DanShell » Sun 24 Aug, 2014 7:46 pm

perfectlydark wrote:That looks good! Do you have any suspension in it to.keep it off your face?


Not yet, Ill sew some tabs into the top of it so I can tie it up off my face. I put one down near my feet although not necessary really. I wanted to finish it so I could work out exactly where to put the tabs near the head.
User avatar
DanShell
Athrotaxis selaginoides
Athrotaxis selaginoides
 
Posts: 1200
Joined: Mon 18 Mar, 2013 11:23 am
Location: Central
Region: Tasmania
Gender: Male

Re: UL Silnylon Bivy

Postby perfectlydark » Sun 24 Aug, 2014 8:16 pm

Good idea. I like it, good project!
perfectlydark
Phyllocladus aspleniifolius
Phyllocladus aspleniifolius
 
Posts: 921
Joined: Tue 04 Jun, 2013 6:13 pm
Region: New South Wales
Gender: Male

Re: UL Silnylon Bivy

Postby walkon » Sun 24 Aug, 2014 8:43 pm

What is the rough cost of this
Cheers Walkon

"I live in a very small house, but my windows look out on a very large world."
User avatar
walkon
Phyllocladus aspleniifolius
Phyllocladus aspleniifolius
 
Posts: 785
Joined: Sun 24 Nov, 2013 7:03 am
Region: Victoria
Gender: Male

Re: UL Silnylon Bivy

Postby DanShell » Sun 24 Aug, 2014 8:45 pm

walkon wrote:What is the rough cost of this



Hmm good question, without checking exactly I'd say it was less than $50.
User avatar
DanShell
Athrotaxis selaginoides
Athrotaxis selaginoides
 
Posts: 1200
Joined: Mon 18 Mar, 2013 11:23 am
Location: Central
Region: Tasmania
Gender: Male

Re: UL Silnylon Bivy

Postby andrewa » Sun 24 Aug, 2014 9:02 pm

Condensation issues probably forthcoming....unless you have a sleeping bag that is cold enough that you don't sweat at all....

Bivy bags have all sorts of scientific issues attached to them. You need a vapour gradient. If you have a well insulated sleeping bag, the water vapour going through the outer layer is going so slowly it won't get through any fabric, breathable or not. If you have a crap sleeping bag, and you are cold, then there is probably enough vapour gradient to allow an outer layer to transfer it.

Focus on other projects!

A
andrewa
Athrotaxis selaginoides
Athrotaxis selaginoides
 
Posts: 1434
Joined: Sat 05 Mar, 2011 5:55 pm
ASSOCIATED ORGANISATIONS: None
Region: Victoria
Gender: Male

Re: UL Silnylon Bivy

Postby DanShell » Mon 25 Aug, 2014 9:26 am

andrewa wrote:Condensation issues probably forthcoming....unless you have a sleeping bag that is cold enough that you don't sweat at all....

Bivy bags have all sorts of scientific issues attached to them. You need a vapour gradient. If you have a well insulated sleeping bag, the water vapour going through the outer layer is going so slowly it won't get through any fabric, breathable or not. If you have a crap sleeping bag, and you are cold, then there is probably enough vapour gradient to allow an outer layer to transfer it.

Focus on other projects!

A


Thanks, I have no doubt you are correct. But I'm still happy I made it, if for no other reason I am gaining sewing experience ;)

Im going to be over 1000m this Saturday night so I may give the condensation a run....or Ill put my son it and let him test out the dampness ;)
User avatar
DanShell
Athrotaxis selaginoides
Athrotaxis selaginoides
 
Posts: 1200
Joined: Mon 18 Mar, 2013 11:23 am
Location: Central
Region: Tasmania
Gender: Male

Re: UL Silnylon Bivy

Postby walkon » Mon 25 Aug, 2014 11:36 am

Go for it Dan, it's better to have more doers and have tried in this world. When I tried to work out the condensation issues and getting the bivy off my face and feet I ended up with a tent. Lol
Still think that I should have made it!
Cheers Walkon

"I live in a very small house, but my windows look out on a very large world."
User avatar
walkon
Phyllocladus aspleniifolius
Phyllocladus aspleniifolius
 
Posts: 785
Joined: Sun 24 Nov, 2013 7:03 am
Region: Victoria
Gender: Male

Re: UL Silnylon Bivy

Postby ElvenCraft Gear » Sat 22 Nov, 2014 12:08 pm

+ 1 for the condensation issues.
If you put a double skin in the roof , inner use an untreated ripstop (15-20 denier) and it will absorb the moisture and wick it to the outside if you design the side vents properly. You can even get a ultra fine mesh weave ripstop if you need more ventilation.(I use this in my double skin tents)
Use a 20-30 denier (1.3gsm) silnylon as the outer skin/tarp and you should be pretty dry in all situations.
The most valuable items in your hiking kit are knowledge, experience, and improvisation.
Everything else is luxury.
User avatar
ElvenCraft Gear
Nothofagus gunnii
Nothofagus gunnii
 
Posts: 21
Joined: Sat 22 Nov, 2014 10:23 am
ASSOCIATED ORGANISATIONS: Elvencraft Wilderness Gear
Region: New South Wales
Gender: Male


Return to Make Your Own Gear

Who is online

Users browsing this forum: No registered users and 9 guests