Hi all, my S2S air mat sprung a leak/weld/seam a while ago and before i threw it out, just wondering for other repair ideas (most ive found are from US and have US products not available here).
S2S/snowys were great and replaced it with a new one which I use, just looking to save on landfill.
Ive tried the patch and also some gorrila tape. Photos below show good tape adherence but the air is still escaping and creating air pocket which will fail.
Thoughts, tips, ideas?
Thank you
Shaun
Suggestions air mat repair
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
7 posts
• Page 1 of 1
- Tantell
- Atherosperma moschatum
- Posts: 89
- Joined: Sun 02 Jun, 2013 3:16 pm
- Region: New South Wales
- Gender: Male
Re: Suggestions air mat repair
by Moondog55 » Tue 20 May, 2025 7:38 am
Warranty issue. Contact S2S about the failed weld
Ve are too soon old und too late schmart
- Moondog55
- Lagarostrobos franklinii
- Posts: 11144
- Joined: Thu 03 Dec, 2009 4:15 pm
- Location: Norlane Geelong Victoria Australia
- Region: Victoria
- Gender: Male
Re: Suggestions air mat repair
by Tantell » Tue 20 May, 2025 7:42 am
Thanks Moondog, already done and have my replacement, just trying to see if any way this one can be saved from landfill
- Tantell
- Atherosperma moschatum
- Posts: 89
- Joined: Sun 02 Jun, 2013 3:16 pm
- Region: New South Wales
- Gender: Male
Re: Suggestions air mat repair
by crollsurf » Tue 20 May, 2025 8:30 pm
You did well to find it. I couldn't find the leak in mine. They had an issue with the welds on some of the earlier batches, and they have fixed it now. You could fix that leak but you'll probably find another will pop up.
-
crollsurf - Lagarostrobos franklinii
- Posts: 2317
- Joined: Tue 07 Mar, 2017 10:07 am
- Location: Sydney
- Region: New South Wales
- Gender: Male
Re: Suggestions air mat repair
by Last » Tue 20 May, 2025 11:18 pm
Bicycle tube patch?
Even if it works, would you trust it enough to take it anywhere?
Even if it works, would you trust it enough to take it anywhere?
noen ganger er det godt å være alene i villmarken
- Last
- Lagarostrobos franklinii
- Posts: 2426
- Joined: Thu 23 Jun, 2016 3:43 pm
- Region: Tasmania
Re: Suggestions air mat repair
by GregG » Thu 22 May, 2025 5:34 pm
For what it is worth, I repaired a pin hole leak in a Thermarest simply by cleaning the location of the hole with alcohol and then applying a thin smear of silastic. This was all I had at hand on the occasion but surprisingly it lasted for the remaining life of the mat (another ten years). Dunno if it would work on a S2S, others here seem to be saying that yours has a seam failure issue.
- GregG
- Phyllocladus aspleniifolius
- Posts: 698
- Joined: Sat 09 Nov, 2019 6:44 pm
- ASSOCIATED ORGANISATIONS: Old bushie
- Region: New South Wales
- Gender: Male
Re: Suggestions air mat repair
by Tantell » Thu 22 May, 2025 7:02 pm
Thank you. Im planning on using it for my 20kg daughter, so much less weight than i would put. Cheers will see how we go
- Tantell
- Atherosperma moschatum
- Posts: 89
- Joined: Sun 02 Jun, 2013 3:16 pm
- Region: New South Wales
- Gender: Male
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 49 guests